Overview: National Tank Services, part of the Trimac Family of Companies, stands proudly at the forefront of North America's truck maintenance and tank cleaning industry. We offer inspection, repairs, certification and cleaning services to keep fleets certified, safe and compliant.At National Tank Services, we know it's not just about the job, it's about the journey. If you’re ready for a challenge supported by a culture of safety, stability growth and a positive work environment, we invite you to begin your journey with us.Contact our team of in-house Recruiters: 1-866-8-TRIMAC Pay Details: Starting pay $25.00/hr Schedule: 1st shift Monday- Friday, 8:00 am-4:30 pm Job Details: Perform preventive maintenance on trucks and trailers while utilizing personal safety equipment as required.Move trucks and trailers in and out of the shop for maintenanceOpen repair orders and charge the appropriate parts to the repair orderPerform tire inspections/appropriate paperwork to company standardsPerforms shop clean-up and housekeeping responsibilities as well as other miscellaneous-related duties as assigned.Inspects and maintains basic vehicle/accessorial worthiness including proper fuel levels and tire air pressure, fluid levels, brakes, lights, and safety equipment, and submits reports indicating the condition of equipment.Comprehend and perform the Driver Vehicle Inspection Repair (DVIR) processDiagnose and repair: Tire/wheel, Brakes & Air Systems, Clutch & Linkage, Mud flaps/hangers, Air intake system, Start, charging, and electrical systems, Landing gear and attachments, In transit heat systems, Install, diagnose, and repair e-log systemPerform trailer prepsPossesses and demonstrates the ability to perform assigned tasks in a manner that adheres to the company's Safety, Health, Environmental, and Security policies. Responsibilities: Assist with preventive maintenance on trucks and trailers while utilizing personal safety equipment as required.Move trucks in and out of the shop for maintenanceOpen repair orders and charge the appropriate parts to the repair orderPerform tire inspections/appropriate paperwork to company standardsPerforms shop clean-up and housekeeping responsibilities as well as other miscellaneous related duties as assigned.Inspects and maintains basic vehicle/accessorial worthiness including proper fuel levels and tire air pressure, fluid levels, brakes, lights, and safety equipment, and submits reports indicating the condition of equipment.Possesses and demonstrates the ability to perform assigned tasks in a manner that adheres to the company's Safety, Health, Environmental, and Security policies. Qualifications: Must have a valid driver’s licenseAbility to provide own basic hand toolsHigh School Diploma or GED2 years of verifiable diesel mechanic experiencePrevious experience with all types and makes of tractors/trailers and heavy-duty diesel trucksBasic computer skillsAbility to read and comprehend service manualsKnowledge of tools and equipment used in the shop to repair and maintain company equipmentA basic knowledge of tractor and trailer maintenanceKnowledge of D.O.T. regulations and out-of-service parameters for tractors, trailers, and accessorial equipment. Benefits: Holiday and vacation payMedical, dental, and vision insuranceEmployee Assistance ProgramLife Insurance & Disability InsuranceFlexible Spending Accounts (Health & Dependent Care) Additional Perks: Tool reimbursement program Safety Commitments: We make safety a part of every decisionWe make safety personalWe have the courage to intervene Pay Range: Starting from USD $25.00/Hr.

!!!Sign-On Bonus of $2,500!!! (Internal Applicants Not Eligible) Who We Are, and What We Do:AtCorteva Agriscience,you will help us grow what's next. No matter what your role, you will be part of a team that is building the future of agriculture - solving the world's food problems through innovation, technology, and putting people first.Corteva Agriscience is currently seeking anElectrician to join our team at our Plymouth, Indianalocation.What You Will Do:Ensure operation of company equipment including electrical, mechanical, instrumentation, control devices, and HVAC, for process and facilityPerform electrical repairs and scheduled inspections of equipment, following the prescribed guidelines and proceduresReview and lead electrical safety program for the plant maintenance teamService, troubleshoot, and repair any problem of any electrical/mechanical natureAdherence to all quality systems & safety procedures including Environmental regulations, OSHA, and PSM procedures in everyday work routineMake recommendations for improved safety through electrical programs and/or process changes including the addition of new devices, and hardwareServe as safety program leaderVarious other duties as assignedEducation:You have your High School Diploma or equivalentWhat Skills You Need:You possess working knowledge and are willing and able to interpret the National Electric Code (NEC)You possess two (2) to three (3) years of Industrial Electrician / Maintenance experienceYou enjoy working on machines and electrical components!When there is a problem, you see an exciting opportunity to troubleshoot so you can find and implement solutions!You are willing and able to do the following with or without reasonable accommodation: Climb and/or work in elevated areas, Stand and sit for extended periods, work outdoors and indoors in hot, cold, wet, and dry conditions, lift up to fifty (50) lbs., and perform work that involves repetitive motion and liftingYou have a valid US Driver's LicenseYou are comfortable with technology and possess good computer aptitude including the use of Microsoft Applications (Outlook, Word, Excel, PowerPoint, etc.), and are willing and able to learn other company-specific applications as required You know how to schedule work/jobs and you do an excellent job of following up on completion statusYou have high diligence can multitask, maintain an organized workplace, and have excellent problem-solving skillsYou value working as a team, are proactive, communicate concerns, and are accepting of changeYou possess good written, verbal, and interpersonal communication skills with the ability to communicate effectively with internal and external customersYou uphold health and safety to the highest standard! You consistently help others and demonstrate adherence to safety protocols, policies, and procedures to ensure you and your colleagues go home safely every dayYou value serving your customers and know operations must be supported for optimal uptime, so you are willing and able to work the hours required of this role to achieve that missionWhat Makes You Stand Out:Associate or Two-Year Trade School Degree within the Technical, Electrical, or Mechanical fieldJourneymen licenseExperience with a work order and part inventory systemKnowledge and/or experience with Automation and Programmable Logic Controls (PLC)Previous industrial maintenance work production equipment - electrical, mechanical, hydraulics, instrumentation and controls, HVAC, and general maintenance experience).Experience with an E-Maintenance (or similar system) for work orders and parts inventoryWork Authorization and Relocation:VISA Sponsorship isNOTavailable for this positionRelocation allowance isNOTavailable for this positionSite Dedicated (100% at Corteva location):This role will be on-site at our Corteva locationBenefits - How We'll Support You:Numerous development opportunities offered to build your skillsBe part of a company with a higher purpose and contribute to making the world a better placeHealth benefits for you and your family on your first day of employmentFour weeks of paid time off and two weeks of well-being pay per year, plus paid holidaysExcellent parental leave which includes a minimum of 16 weeks for mother and fatherFuture planning with our competitive retirement savings plan and tuition reimbursement programLearn more about our total rewards package here - Corteva BenefitsCheck out life at Corteva! www.linkedin.com/company/corteva/life Are you a good match Apply today! We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team.Corteva Agriscience is an equal opportunity employer. We are committed to embracing our differences to enrich lives, advance innovation, and boost company performance. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, military or veteran status, pregnancy related conditions (including pregnancy, childbirth, or related medical conditions), disability or any other protected status in accordance with federal, state, or local laws.

I. Job SummaryManage the Landfill Gas to Energy Facility to maximize production, while ensuring safe work practices, environmental compliance, timely maintenance, compliance with contracts, and coordination with the landfill management and operations. This role acts as a plant owner, and is available whenever necessary to meet the objectives of the role and the needs of the facility.II. Essential Duties and ResponsibilitiesTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. By thorough evaluation of operational data, be responsible for planning a proper course of action and have complete ownership for managing production capacity in efforts to reduce plant operating expenses while limiting equipment downtime without impairment. Inspects ongoing activities for safety and environmental compliance, and for adherence to Standard Operating Procedures. Reports and develops recommendations for corrective actions in any instances of reoccurring shutdowns or equipment de-rating in order to notify WMRE operations managers whether further analysis is necessary. Responsible for ensuring compliance with all operational requirements of the air permit, which may include CYCLE task tracking, documentation of compliance with standard operating procedures, performing emissions tests, and adjusting equipment to meet emissions limits. Represents WMRE during third party testing and regulatory inspections. Secures, manages, and coordinates all 3rd party vendors for scheduled plant maintenance, unscheduled down time, compliance, and well-field issues. Regularly communicates this with the Market Area Gas Operations Manager (MAGOM) and/or WMRE Operations Manager. Manages various relationships with power/gas purchasers as a first point of contact, with respect to facility operations and compliance with scheduling requirements. Complies with power purchase agreements, gas sales agreements, interconnect agreements, or other contracts. Inspects plant machinery and equipment. Repairs, maintains, and services all equipment in accordance with the facility Standard Operating Procedures, equipment maintenance manuals, and WMRE policies and training. Must also be knowledgeable to handle non-routine repairs or issues that may arise and require sound, immediate judgment without direct supervision. Implements WM and WMRE safety policies and practices for all work activities, and ensures these practices are followed by other WM staff, vendors, contractors, and visitors entering the facility. Completes all mandatory training activities for both safety and operational training as assigned by supervisor. Procures plant supplies and replacement equipment in an efficient manner by identifying needs in advance, managing vendors, and working within WMRE guidelines as well as being responsible for the annual budget. Promptly responds to call-outs of plant shutdowns during non-business hours to identify the cause of the shutdown and rectify/diagnose through appropriate repairs or adjustments to return the plant to operation while consulting with WMRE operations managers (as needed). This role is given discretion to judge the situation and respond accordingly without management intervention, until needed. Identifies backup staff in coordination with the WMRE regional manager, and assigns call-out schedules to ensure that there is at least one plant manager available 24/7/365 for plant shutdowns and emergencies. For self and backup, adjusts daily or weekly on-site presence at plant during business hours to reflect time spent for call-outs, with consideration that all other daily and monthly duties must be completed on a timely basis. Maintains the facility spare inventory and provides a written inventory count twice annually. Schedules and conducts plant tours as requested to support good community relations. Represent WMRE as the on-site technical expert on production of renewable energy from landfill gas. Participates actively in developing and implementing ongoing public relations between the plant and community to ensure favorable outlook of the facility from both customer and community. Participates in public forums to support business development and community education. Ensures the potential for use of the facility as a marketing platform and supervises such activities. Maintains effective relationships with key political and community decision makers in the region. Completes special assignments/tasks as required by WMRE Operations Manager, Market Area Gas Operations Manager, or Landfill District Manager. III. Supervisory Responsibilities This job has no supervisory duties. IV. Qualifications The requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience Education: High School Diploma or GED (accredited)Experience: 5 years of relevant work experience diagnosing and repairing internal combustion engines and cooling systems. B. Certificates, Licenses, Registrations or Other Requirements Must have valid drivers license C. Other Knowledge, Skills or Abilities Required Fundamental knowledge of computer data entry and interpretation. Must be able to successfully manage fiduciary responsibilities. Must be able to lift a minimum of 100 lbs. Must be able to travel up to 15% with overnight stays. Must be able to diagnose and repair DC circuits 12/24 volts. Basic knowledge of 120/240/480 3ph volt AC circuits. Understand concepts of 4160 volt circuits Must be familiar with basic principles of building maintenance. V. Work EnvironmentListed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.Normal setting for this job is: shop/power plant environment.BenefitsAt Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site.If this sounds like the opportunity that you have been looking for, please click "Apply.

At Crew Carwash, our Purpose is to“Create Smiles and Lifetime Customers.” As a Maintenance Technician, you will have the opportunity to join a Glassdoor Best Place to Work and achieve your full potential! What you’ll do at Crew: Smile! Live and model our #1 Value of SafetyEnsure proper location maintenanceEnsure mechanical operational excellenceEnsure equipment standardizationComplete required maintenance work (don’t worry, we’ll thoroughly train you)Complete maintenance training with location leadership teams Crew’s commitments to you: $20.45 - $29.05 per hour!Daily pay options available at no cost to youPaid Time Off + 6 paid holidays each yearFree carwashes, naturally Industry-leading trainingIncredible growth potentialTuition reimbursementGroup health, dental, and vision401K with company match Crew’s expectations: Must be at least 18 years old Have 1+ years mechanical experienceBe able to work a night schedule 4 days/week Monday-Thursday 8p-7aHave the ability to work in a fast-paced operations environment Be able to stand for extended periods of time (up to 8+ hours per day) Be able to hustle with a sense of urgency Be able to reach, twist, kneel, squat, run, and/or jump Be comfortable working near/around moving mechanical parts Be able to climb ladders, scaffolds, and platforms Be able to lift or move a minimum of 25 pounds Be able to operate and utilize electronic devicesWe're in the people business, we just happen to wash cars!

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or .Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.Job Location: Lake Odessa, MIJob Type: Full TimeShift Available: 2ndCompensation: Up to $41.00/hrSign-On Bonus: $5,000Benefits Information$2 shift differential (2:00pm – 6:00am)$3.00/hr Weekly Perfect Attendance BonusMedical, Dental, Vision, and Prescription Drug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesMaintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser waterPerform daily monitoring of the system through walk arounds and trend graphsOptimize ammonia operations through the use of the Logix systemOversee of training for Maintenance techs to build and maintain operator levelsWriting and review of task procedures, PM’s and SOP’s for operation of equipment and systemSupport in PSM compliance auditsMaintain Plant equipment and other work: Maintain PIT licenseDisplay knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-upWork with supervisor/production to promote quality and yield improvementsComplete schedule daily workAssist in wastewater operation when neededWork on air compressor systems and HVAC equipment as neededComplete necessary documentation related to completion of Work Orders and applicable PSM ElementsAny other duties as assignedRequired QualificationsEligible to work in the United States without Visa sponsorshipMust be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025Must be 18 years or olderHigh School Diploma or GED EquivalentUnderstanding of Anhydrous Ammonia Refrigeration systemsHave the Ammonia Refrigeration Systems Certification – Operator Level 1Able to wear a full face breathing respirator maskWilling to be a part of the Hazmat teamHave at least 3 years industrial maintenance experienceHave a strong electrical & mechanical aptitudeAbility to read & interpret blueprints or other forms of engineering drawingsAbility to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematicsPossess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditionsAbility to understand and learn Evaporative Condenser water chemistryAble to work weekends as neededPreferred QualificationsComputer literacy and eagerness to learn SAP/PPE systemsMaintenance experience in a food processing environmentUnderstanding of waste water systemHVAC System ExperienceBoiler ExperienceCompressed Air Systems Operating ExperienceAble to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc.Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuitsPlease note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Overview:Tire Technician – Part-Time – Benton HarborDiscount Tire675 E Napier AveBenton Harbor,Michigan49022OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $15-$17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.Responsibilities:#discounttire12

As an Automotive Technician at Belle Tire, you do what it takes to keep life moving for our customers by providing expert automotive repairs and will thrive in a fast-paced, team-oriented environment focused on safety and quality. We are looking for someone with a passion for working on cars and a commitment to delivering outstanding service to our customers. What You'll Do Perform automotive repairs on a variety of systems including engine repair, drive train/axles, suspension/steering, brakes, electrical, heating/air conditioning and engine performanceEnsure all work meets Belle Tire's high-quality and safety standardsDeliver exceptional customer service by exceeding customer expectations for quality and serviceMaintain a clean, organized, and safe work areaPerform other duties as assigned by your manager What We're Looking For Minimum Qualifications: 18 years oldValid driver's licenseState of Michigan Mechanic Certification (Applicable in Michigan Only) 2 years of automotive repair/mechanic experience Customer-first mindset Preferred Qualifications: High school diploma or GEDASE Certifications Physical Requirements: Ability to stand for long periods, bend and lift up to 75 pounds Work Environment This position is based within a tire and automotive service retail store. Varying work hours, Monday through Saturday, with possible overtime. Fast-paced workshop setting with physical demands, including extended standing and heavy lifting. Benefits We offer premium benefits to keep your life moving. $5,000 Signing Bonus (Automotive Technician/Alignment Technicians only) Medical, Dental, Vision InsuranceFlexible Spending AccountLife/AD&D Insurance Short/Long-Term Disability InsuranceEmployee Assistance Program 401(K) with company match Flexible Paid Time OffClosed Sundays and Holidays (New Year's Day, Memorial Day, 4th of July, Labor Day, Thanksgiving Day and Christmas Day) Discounts on Products and ServicesEmployee Referral ProgramPaid Training and Reimbursement for ASE CertificationsBelle Tire Scholarship Program Career Growth Opportunities with a Growing CompanyLearn more at https://www.belletirecareers.com/benefits/ Compensation $80,000 - $100,000 / year About Us At Belle Tire, we believe you deserve a better experience when it comes to tires and vehicle services. That starts with hiring people who genuinely care - that's the Belle Tire Difference. With over 180 locations and 3,000 dedicated employees across Michigan, Ohio, Indiana, and Illinois, we are your one-stop shop for tires, wheels, and full-service automotive repairs. Our services include alignments, brakes, batteries, heating and cooling, oil changes, auto glass repair, and more. Since 1922, we've done what it takes to keep life moving for our customers and employees. We live by a shared set of values: Customer Satisfaction is the Bottom Line, we always Do the Right Thing, we Set the Tone with a positive attitude, we believe We Are They - there is no "us" and "them" here, and we Walk the Walk by following through on our commitments. These beliefs shape a culture of trust, respect, and pride, making Belle Tire a great place to build your career. We're not your ordinary tire shop, we're Changing Tires. Belle Tire is an Equal Opportunity Employer. We ensure all individuals are considered for employment and advancement based on their qualifications, skills, achievements, and experience, without regard to race, color, national origin, sex, age, religion, disability, veteran status, genetic information, sexual orientation, gender identity and expression, or any other characteristic protected by federal, state, or local law. #AutoTech123

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $25 to $42/hr. and sign-on bonuses up to $3,000 (per location).Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as an HVAC and Refrigeration TechnicianActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift to 50 lbs., climb and balance on a ladder, and work in elevated/high locations.#hvac #refrigeration #icemachine #EPA Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

The HVAC Technician I performs maintenance, repairs and installation of assigned HVAC and Refrigeration equipment and controls, chilled water systems, boilers, and various other mechanical, electrical and building systems in accordance with client expectations and requests. Job Summary Details: The HVAC Technician I performs maintenance, repairs and installation of assigned HVAC and Refrigeration equipment and controls, chilled water systems, boilers, and various other mechanical, electrical and building systems in accordance with client expectations and requests. 1st shift: 6am to 2:30pm Monday - Friday- available for ER's if necessary Pay $31.00 an hour:or The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. 2025 Benefits https://wpe-media.abm.com/wp-content/uploads/2025/ABM_2025_Employee_Benefits_Staff_&_Management_No%20Date%209.5.24.pdf Basic Qualifications: • Must be 18 years of age or older • High School Diploma, GED or suitable equivalent is required • Must possess a valid, unexpired driver's license Preferred Qualifications: • Three (3) years of HVAC experience is preferred • Possession of refrigeration/HVAC trade or vocational certification is preferred Responsibilities: • Troubleshoot, calibrate and adjust pilots, thermostats and burners, transformers, controls, relays, heaters, elements, switches and controls on electrical systems • Use common tools of the HVAC trade in daily work (e.g multimeter, refrigerant gauges, charging charts, hand tools etc.) • Install, maintain and repair ventilation and air conditioning systems and equipment • Identify maintenance risks on equipment • Diagnose electrical and mechanical faults for HVAC systems • Clean, adjust and repair systems, and performs warranty services • Perform emergency repairs promptly and efficiently • Provide technical direction and on-the-job training • Keep daily logs and records of all maintenance functions • Ensure compliance with appliance standards and with Occupational Health and Safety Act • Comply with service standards, work instructions and customers' requirements • Assist with customer queries inquiries • Complete other duties as assigned • Entry-level HVAC technicians encouraged to apply Entry-level HVAC technicians encouraged to apply . ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 91C, UT, 1161, 3E1X1 #300About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call . We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

Location: New Buffalo, MICompensation: $28/hr - $32/hr, depending on experienceSchedule: During peak season, this team operates on a 24/7 schedule to meet customer demand. Flexibility is key, and workweeks may exceed 40 hoursOverview:Avenica is currently evaluating talent for a Pool Repair and Service Technician with a leading pool service provider in New Buffalo, MI. With over 30 years of industry experience, this company has built a trusted reputation for delivering full-service pool careincluding maintenance, repairs, and retail solutions. This role offers the chance to contribute directly to the company's continued growth, while developing your career in a hands-on, customer-focused environment.We're looking for candidates who are organized, team-oriented, and able to build strong relationships with customers and colleagues alike.You Will Be Responsible for:Maintain residential customers pools and/or spas by providing weekly maintenance service which includes but is not limited to, brushing pool/spa walls, vacuuming, cleaning filter cartridges, chemical readings and dosing.Repair or Install replacement equipment and parts per manufacturers specifications to honor manufacturers warranties.Complete equipment preventive maintenance in accordance with established standardsTroubleshoot, analyze and repair pool and/or spa equipment malfunctions in accordance with EPA established standards.Follow maintenance schedule to complete accurate and timely equipment maintenance and operating logs.Complete documentation, including but not limited to, timesheets, expense reports, service reports and purchase card logs.Conduct general tasks including, but not limited to, safety training, group meetings and maintaining tools and vehicleRequirement to work overtime during the week and/or weekends.About You:You are excited about a work culture that’s big on relationships, dignity, flourishing, and winning.You know how to research and find answers and solutions to problems and don’t shy away from doing so.Creating order out of chaos, and finding a better way is just something you do. If you can automate it or improve it, you don’t hesitate to do it.You’re results-oriented and measure everything for yourself as much as you do it for the business.You’re competitive without compromising your values or integrity.Requirements:High school diploma, G.E.D. or equivalent required.A valid Driver’s License is required with clean driving record.A minimum of 2 years consistent work experience is field service / customer service role where you have worked independently.This role is also a strong match for individuals with transferable experience from HVAC, plumbing, appliance repair, marine systems, or facilities maintenance.This role involves physical tasks that are essential to job performance, including lifting, kneeling, bending, and standing for extended periods in an outdoor environment.Accountable, reliable and a courteous attitude towards our customers.Ability to read and comprehend instructions including, but not limited to, safety policies and procedure manuals.Ability to write routine reports and correspondence.Prior experience / knowledge in a home service industry is a plus.Basic mathematical abilities in all units of measure. Read technical schematics as well as specification manuals.

Electronics Engineering Technician Munster, IN | Onsite | Contract-to-Hire Day Shift | Monday–Friday Pay: Up to $30.85/hour Military Veterans Encouraged to Apply Manpower Engineering is hiring an experiencedElectronics Engineering Technicianfor acontract-to-hireopportunity with our client inMunster, Indiana. This is amid- to senior-levelrole ideal for candidates with a strong background in electronics diagnostics and repairespecially those with military or industrial experience. What You’ll Be Doing: Diagnose and repair a wide range of electronic devices, including: AC/DC and Servo drives Analog/digital I/O boards Inverters and industrial control devices Use SMT and thru-hole soldering techniques with equipment like Pace rework systems Troubleshoot down to the component level on PCBs Work with test equipment such as oscilloscopes, multimeters, signal generators, and Huntron trackers Apply Today!If you're ready to bring your electronics expertise to a dynamic team, we want to hear from you. Apply now and take the next step in your career with Manpower Engineering! What’s in It for You: Competitive pay up to$30.85/hour Contract-to-hire path with long-term potential Day shift scheduleMonday through Friday Opportunity to work with cutting-edge electronics in a collaborative environment Supportive team culture that values veterans and hands-on experience What We’re Looking For:2-year degree in Electronics Technologypreferred, or7–10 years of hands-on experience(military electronics experience highly valued) Strong diagnostic and troubleshooting skills Proficiency in bothTHT and SMT soldering/desoldering Experience with test equipment and electronic repair tools. A hands-on mindsettinkerers and hobbyists (e.g., auto repair, electronics) are a great fit. Dependable, team-oriented, and eager to learn. About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson WellsManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Entity: Production & OperationsJob Family Group: Operations GroupJob Description: Located at bp's Whiting Refinery in Whiting, Indiana, the Major Maintenance (MM) and Minor TAR Advisor will act in support of Major Maintenance Leadership for the Major Maintenance strategy, maintenance budget, life cycle planning, and continuous improvement. They will also be the single point of accountability for field activities and repairs related to their respective scope(s). This role will be accountable for the planning and coordination related to these activities, as well as the safe and efficient execution of the plan.The Major Maintenance and Minor TAR Advisor will act as the liaison with various craft contractors and contractor superintendents to ensure adherence to the budget and schedules. This position exhibits bp leadership expectations, is a safety and environmental leader within the team, upholds bp values and behaviors, and communicates how asset team performance drives delivery of the refinery's business objectives.Key Accountabilities:Responsible for health, safety, and environmental performance to achieve the goal of no accidents, no harm to people and no harm to the environment.Supports the implementation of safety improvement recommendations.Supporting and sharing safety learning across the siteCollaborating with contractor teams to build an execution planReviewing and approving contractor invoicesSupports a zero overdue culture with action itemsProviding status updates to stakeholdersDriving efficiencies through work management processSettling proper scope definition for repairs and ensuring quality constructability reviewsScheduling changes related to adjustments to priorities, staffing, or financials.Input into PJSA conversations and risk assessments.Driving performance with execution & engineering teams, review performance KPIsBuilding Multi year plan and budget estimates with stakeholdersThe implementation of MM strategy and improvement plans.Developing and organizing work/bid packages and review process.Facilitating and initiating MOCs for MM program work.Requirements:High School Diploma or GED with 5 years of relevant experience.Specific skills and knowledge of maintenance work practices, equipment, and test methods.Knowledge of work permitting and risk assessment process for maintenance preparation / execution activitiesDemonstrated basic cost control skills.Strong Maintenance & Reliability backgroundUnderstanding of Reliability principles and toolsRecognizes applicable codes and standards as applied to the maintenance of refining equipment.Personal behaviors: Adaptability, communication, performance bias and taking the lead.Desirable Criteria:Bachelor’s degree in related field.Previous leadership experience in a fast-paced multifaceted work environment.Proven record of driving continuous improvement in maintenance work execution using the work management process.Why Join Our Team At bp, we provide an excellent working environment and employee benefits such as a great work-life balance, tremendous learning and development opportunities to craft your career path, life and health insurance, medical care package and many others!We support our people to learn and grow in a diverse and exciting environment. We believe that our team is strengthened by diversity. We are committed to crafting an inclusive environment in which everyone is respected and treated fairly!We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, perform crucial job functions, and receive other benefits and privileges of employment. Don’t hesitate to get in touch with us to request any accommodations.Travel RequirementUp to 10% travel should be expected with this roleRelocation Assistance:Relocation may be negotiable for this roleRemote Type:This position is not available for remote workingSkills:Agility core practices, Agility core practices, Asset health monitoring, Asset Life Cycle Management, Asset Management, Commercial Acumen, Cost-conscious decision-making, Cost Leadership, Cost Performance Management, Decision Making, Defect Elimination, Digital fluency, Equipment criticality assessment, Equipment strategies, Facilitation, Group Problem Solving, Influencing, Maintenance, history and coding, Maintenance fundamentals, OMS and bp requirements, Plant Economics, Presenting, Process Safety Management, Reliability Fundamentals, Reliability in Design {+ 8 more}Legal Disclaimer:We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process,pleasecontact us.If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Utility Worker to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be assisting with maintaining the location building and equipment systems by performing; basic maintenance and plant utility functions, loading and unloading deliveries, painting, operating industrial equipment, and plant cleaning / blowdowns. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you’ll be doing: Utilize equipment to perform plant cleaning operations, this includes,: floor scrubbers, lint and dust removal devices, outside rubbish removal, equipment cleaning, and pit / trench screen cleaning.Perform miscellaneous painting tasks throughout the plant or outside on facility grounds.Operate powered industrial forklifts / lifts throughout the facility to assist in relocating materials.Assist in loading and unloading trucksAssist with production receiving activities.Perform various levels of facilities upkeep including landscaping, snow removal, and other removal operations.Perform light equipment maintenance tasks, trench screen cleaning, lint and dust blowdown of facilities and equipment, fluid level checks, light bulb replacement, ceiling tile replacement, cart cleaning and repair, and pressure washing after appropriate training from UniFirst.Upon proper training and certification, may be called upon to operate Company vehicles such as shuttle trucks or route trucks.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for:High school education and/or GED equivalent is required.At least 2 years of relevant experience is preferred.Must be 18 years of age or olderValid driver's license and a safe driving record are required.Ability to work independently with little or no supervision.Must be able to operate powered industrial equipment (forklifts, floor scrubbers, scissor lifts) and other similar tools as required.Experience using basic hand and power tools is required.Ability to read, comprehend and interpret procedures and instructions in English.Ability to effectively present information and respond to questions from co-workers and managers.Ability to work overtime as needed is required.Ability to lift up to 80 lbs.About UniFirstThe fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization.UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or .Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.Job Location: Lake Odessa, MIJob Type: Full TimeShift Available: 2ndCompensation: Up to $41.00/hrSign-On Bonus: $5,000Benefits Information$2 shift differential (2:00pm – 6:00am)$3.00/hr Weekly Perfect Attendance BonusMedical, Dental, Vision, and Prescription Drug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesMaintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser waterPerform daily monitoring of the system through walk arounds and trend graphsOptimize ammonia operations through the use of the Logix systemOversee of training for Maintenance techs to build and maintain operator levelsWriting and review of task procedures, PM’s and SOP’s for operation of equipment and systemSupport in PSM compliance auditsMaintain Plant equipment and other work: Maintain PIT licenseDisplay knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-upWork with supervisor/production to promote quality and yield improvementsComplete schedule daily workAssist in wastewater operation when neededWork on air compressor systems and HVAC equipment as neededComplete necessary documentation related to completion of Work Orders and applicable PSM ElementsAny other duties as assignedRequired QualificationsEligible to work in the United States without Visa sponsorshipMust be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025Must be 18 years or olderHigh School Diploma or GED EquivalentUnderstanding of Anhydrous Ammonia Refrigeration systemsHave the Ammonia Refrigeration Systems Certification – Operator Level 1Able to wear a full face breathing respirator maskWilling to be a part of the Hazmat teamHave at least 3 years industrial maintenance experienceHave a strong electrical & mechanical aptitudeAbility to read & interpret blueprints or other forms of engineering drawingsAbility to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematicsPossess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditionsAbility to understand and learn Evaporative Condenser water chemistryAble to work weekends as neededPreferred QualificationsComputer literacy and eagerness to learn SAP/PPE systemsMaintenance experience in a food processing environmentUnderstanding of waste water systemHVAC System ExperienceBoiler ExperienceCompressed Air Systems Operating ExperienceAble to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc.Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuitsPlease note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

As an Automotive Technician at Belle Tire, you do what it takes to keep life moving for our customers by providing expert automotive repairs and will thrive in a fast-paced, team-oriented environment focused on safety and quality. We are looking for someone with a passion for working on cars and a commitment to delivering outstanding service to our customers. What You'll Do Perform automotive repairs on a variety of systems including engine repair, drive train/axles, suspension/steering, brakes, electrical, heating/air conditioning and engine performanceEnsure all work meets Belle Tire's high-quality and safety standardsDeliver exceptional customer service by exceeding customer expectations for quality and serviceMaintain a clean, organized, and safe work areaPerform other duties as assigned by your manager What We're Looking For Minimum Qualifications: 18 years oldValid driver's licenseState of Michigan Mechanic Certification (Applicable in Michigan Only) 2 years of automotive repair/mechanic experience Customer-first mindset Preferred Qualifications: High school diploma or GEDASE Certifications Physical Requirements: Ability to stand for long periods, bend and lift up to 75 pounds Work Environment This position is based within a tire and automotive service retail store. Varying work hours, Monday through Saturday, with possible overtime. Fast-paced workshop setting with physical demands, including extended standing and heavy lifting. Benefits We offer premium benefits to keep your life moving. $5,000 Signing Bonus (Automotive Technician/Alignment Technicians only) Medical, Dental, Vision InsuranceFlexible Spending AccountLife/AD&D Insurance Short/Long-Term Disability InsuranceEmployee Assistance Program 401(K) with company match Flexible Paid Time OffClosed Sundays and Holidays (New Year's Day, Memorial Day, 4th of July, Labor Day, Thanksgiving Day and Christmas Day) Discounts on Products and ServicesEmployee Referral ProgramPaid Training and Reimbursement for ASE CertificationsBelle Tire Scholarship Program Career Growth Opportunities with a Growing CompanyLearn more at https://www.belletirecareers.com/benefits/ Compensation $80,000 - $100,000 / year About Us At Belle Tire, we believe you deserve a better experience when it comes to tires and vehicle services. That starts with hiring people who genuinely care - that's the Belle Tire Difference. With over 180 locations and 3,000 dedicated employees across Michigan, Ohio, Indiana, and Illinois, we are your one-stop shop for tires, wheels, and full-service automotive repairs. Our services include alignments, brakes, batteries, heating and cooling, oil changes, auto glass repair, and more. Since 1922, we've done what it takes to keep life moving for our customers and employees. We live by a shared set of values: Customer Satisfaction is the Bottom Line, we always Do the Right Thing, we Set the Tone with a positive attitude, we believe We Are They - there is no "us" and "them" here, and we Walk the Walk by following through on our commitments. These beliefs shape a culture of trust, respect, and pride, making Belle Tire a great place to build your career. We're not your ordinary tire shop, we're Changing Tires. Belle Tire is an Equal Opportunity Employer. We ensure all individuals are considered for employment and advancement based on their qualifications, skills, achievements, and experience, without regard to race, color, national origin, sex, age, religion, disability, veteran status, genetic information, sexual orientation, gender identity and expression, or any other characteristic protected by federal, state, or local law.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or .Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.Job Location: Lake Odessa, MIJob Type: Full TimeShift Available: 2ndCompensation: Up to $41.00/hrSign-On Bonus: $5,000Benefits Information$2 shift differential (2:00pm – 6:00am)$3.00/hr Weekly Perfect Attendance BonusMedical, Dental, Vision, and Prescription Drug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesMaintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser waterPerform daily monitoring of the system through walk arounds and trend graphsOptimize ammonia operations through the use of the Logix systemOversee of training for Maintenance techs to build and maintain operator levelsWriting and review of task procedures, PM’s and SOP’s for operation of equipment and systemSupport in PSM compliance auditsMaintain Plant equipment and other work: Maintain PIT licenseDisplay knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-upWork with supervisor/production to promote quality and yield improvementsComplete schedule daily workAssist in wastewater operation when neededWork on air compressor systems and HVAC equipment as neededComplete necessary documentation related to completion of Work Orders and applicable PSM ElementsAny other duties as assignedRequired QualificationsEligible to work in the United States without Visa sponsorshipMust be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025Must be 18 years or olderHigh School Diploma or GED EquivalentUnderstanding of Anhydrous Ammonia Refrigeration systemsHave the Ammonia Refrigeration Systems Certification – Operator Level 1Able to wear a full face breathing respirator maskWilling to be a part of the Hazmat teamHave at least 3 years industrial maintenance experienceHave a strong electrical & mechanical aptitudeAbility to read & interpret blueprints or other forms of engineering drawingsAbility to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematicsPossess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditionsAbility to understand and learn Evaporative Condenser water chemistryAble to work weekends as neededPreferred QualificationsComputer literacy and eagerness to learn SAP/PPE systemsMaintenance experience in a food processing environmentUnderstanding of waste water systemHVAC System ExperienceBoiler ExperienceCompressed Air Systems Operating ExperienceAble to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc.Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuitsPlease note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.